Cortex-A17 쿼드 코어 기반 안드로이드 메인보드

by 파인더즈 2022. 10. 17. 22:35

T764 쿼드 코어 GPU를 통합하고 최대 1.6GHz의 클럭으로 우수한 컴퓨팅 성능, 2D/3D 그래픽 처리 기능 및 Full HD 비디오 코덱 기능을 제공합니다.

4Kx2K@60fps 디코딩 및 4Kx2K HDMI 출력을 완벽하게 지원합니다. 이 메인보드는 재료 선택과 디자인이 엄격한 초박형 애플리케이션을 위해 특별히 설계되었습니다. 컴팩트한 크기와 풍부한 인터페이스는 전체 기계에 쉽게 통합되어 최종 제품에 부드러운 경험과 우수한 성능을 제공합니다.

디지털 사이니지, 터치 인터랙티브, 소비자 전자 제품, 엔터테인먼트 시스템 및 기타 산업에 적용할 수 있습니다.

· DDR : LPDDR-III 2GB (4GB optional)
· STORAGE : The default comes with an 16GB EMMC NAND chip that can scale up to 128GB
· LVDS : 30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output
· eDP : 30-Pin FPC EDP display port supporting up to 1920x1200
· HDMI OUTPUT : HDMI 2.0 standard display interface supports up to 4K output
· MIPI-DSI Output : 31-Pin common MIPI DSI interface for extended MIPI panel sub-board
· HP/MIC : Support CTIA 4-pole HP/Mic socket (Left-Right-GND-Mic)
· LINE OUTPUT : Support standard left and right channel line output (pin header)
· Amplifier output : 8 Ohm 6W Dual Audio Amplifier Output
· MIC INPUT : Differential MIC input (pin header)
· USB 2.0 Interface : 2 horizontal connectors (Single Socket，one is for OTG), 7 pin headers (one is CPU original USB)
· Serial Port : 4 TTL/RS-232 compatible
· Micro SD Card : Self-elastic micro SD card socket, up to 128GB capacity
· Camera : Support USB camera within 2 million pixels
· WiFi : Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n
· Bluetooth : Built-in high performance UART interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
· Ethernet : 10/100M Adaptive Ethernet RJ45 connector
· Backlight Control : Industry standard LCD backlight control header, support for backlight switch and brightness adjustment
· Infrared RC : Standard infrared remote control receiver and infrared receiver pin header
· GPIO signals : 5-way GPIO signals for such as GPIO buttons and/or 3.3V digital input/output
· I2C BUS : I2C pin header for I2C capacitive screen and etc
· Real Time Clock : Ultra-low-power RTC circuit (CR1220 battery) with timer and alarm functionalities
· LED Indicator : Green LED indicator for running
· Buttons : Recovery mode button and power switch button
· PW/Reset : One-key power switch and reset pin header
· DC Input : Supports 9~15V wide voltage DC power input
· Ambient Requirement : Working temperature 0°~70°, working humidity 0%~95% (non-condensing)
· Android Version : Support Android 5.1/6.0/7.1/8.1, Recommended Android 7.1